How to install cattle fence

How to install cattle fence

First, place observation of bullpen fence

Before installing Prairie Net, it is necessary to conduct site observation to see if the 8-meter-wide zone of the boundary line of bullpen fence can be smoothed out. If there is any obstruction, it is first eradicated, and the direction of the gates of the bullpen fence wall must be selected to clear the direction of the road.

Second, cattle fence device column

In the corners and corners of the bulls-eye net device, the corner posts are installed, and a bulls talk center pillar is installed every 400 meters along the road from the corner post. A bullpen post is installed every 14m and must be straight, strong and online. Depth angle columns, post columns, and backbone columns are 0.7 meters in depth and 0.5 meters in cattle pens. They are equipped with support rods.

(two posts, two each for the corner post, and one for the center post). Into the ground anchor (post, corner column, the center column two anchors).

Third, install Prairie network fence, bullpen net/net fence/bullpen network

From the bullpen corner post, turn the bullpen in one direction, and the weft from the small side to the ground. Twist the two grassland fences and the cowshed fence joints, and cut the ends of the fences. On the corner post, then use the tensioner to clamp the other end of the weft with a collet, and fix it on the center column of the bullpen, tighten it once every 200 meters. When tightening, each weft must be tightened evenly. The ripples on the plane of the prairie net fence and bullpen fence that are far from the tip should be smooth. During the tightening process, the grassland fence and cowshed fence should be swayed to prevent being entangled with other things so that the force can be evenly distributed. The other end is then tied and tied to the center column. Do not leave the prairie net fence and cowshed net “single weft thread and tie one weft thread” on the small column with tied hooks. The adjacent two small columns should be staggered and tied with hooks to connect the barbed wire with the prairie net fence. A bullpen fence, with at least two hooks between each column, and so on.

Fourth, cattle fence device:

The door is fixed on the door post with a door ear, which ensures that the door is straight and the switch is convenient.

Fifth, the final inspection of cattle pen fence:

The end of the Prairie Network fence installation is necessary to do a final inspection, ensure that all knotting points are correct, the silk heads are trimmed neatly, and the knots are in the correct orientation.